Small Mosque Sound System – TOA MX-6224D Digital Mixer Amplifier with Remote and 6 Column Speaker & 4 Horn Speaker

RM8,541.00

In stock

This package include

- TOA MX-6224D Digital Mixer Amplifier and RC-03 Remote Controller.
- Four TOA 20" Horn Speaker TH652 with TU652M 50W Driver Unit
- Six TOA TZ-406W Column Speaker
- 2 Roll PV Audio Speaker Cable

SKU: PLYMX6224D Categories: ,

Elevate the audio experience in small-sized mosques with our comprehensive Audio Solution! 🕌🎶 Featuring the TOA MX-6224D Digital Mixer Amplifier and RC-03 Remote Controller for seamless control. Complemented by four TOA 20″ Horn Speakers TH652 with TU652M 50W Driver Unit and six TOA TZ-406W Column Speakers for immersive sound. The package also includes 2 rolls of PV Audio Speaker Cable. Priced at just RM8541, it’s the perfect solution for enriching your worship space. 🎵✨

Solution for small sized Mosques

Small Mosques require a sound solution that is basic, yet provides the essentials effectively, and is easy to set up and operate. This solution is ideal for Mosques with a capacity of 50 to 200 faithful and a small amount of reverberation.

Compact all-in-one system
The Digital Mixer Amplifier MX-6224D was designed specifically for Mosques and incorporates a DSP function, a built-in effector, and 2 x 240W class-D amplifiers in one single unit. The MX-6224D is a reliable and simple system, requiring very little technical knowledge, yet providing exceptional sound quality.

Optimise the sound : Pre-programmed sound effects and optimised microphone sensivity
The microphone sensitivity corresponds to the distance between the microphone and the Imam. Built-in amplifiers and digital signal processing with pre-set special effects combined with technically matched microphones and speakers comprise perfect sound and voice intelligibility. Selectable reverberation out of 12 patterns. Control the output level meters for inside and outside, reduce feedback with the built-in 3-band equalizer, use the pre-set effects for your voice and for your rooms: delight your congretation with celestrial sound even in very small Mosques.

Broadcast the message far and clear
The Azan calls the faithful to the place of prayer. The Azan and the voice of the Imam must be heard clearly to the farthest corner. Microphones and speakers must be carefully selected and installed according to the architecture and acoustic challenges of the Mosque. Horn speakers at the minaret spread the powerful Azan over a wide area. The built-in speaker EQ,
optimized for TOA’s horn speakers, reduce acoustic feedback and ensures voices are more intelligible. Furthermore, TOA’s loudspeakers for outside are weatherproof and less vulnerable to damage.

MX-6224D Digital Mixer Amplifier

The MX-6224D, Digital mixer amplifier 2×240W, is designed for 2 zones Public address system that suitable for middle sized mosques application.

Power Source 220 V – 240 V AC, 50/60 Hz
Power Output 240 W × 2 channels (100 V, 42 Ω, rated output)
Power Consumption 100 W (according to IEC60065), 570 W (at rated output, both channels)
Amplification System Class D, Output transformerless galvanic isolated output
Frequency Response 50 Hz – 20 kHz, ±3 dB (at 1/3 rated output, rated load, from power amplifier input)
Distortion 1 % or less (at 1 kHz, 1/3 rated output power)
Input MIC 1: -50 dB (*1) (24 V phantom powered)/-60 dB (*1) (phantom power OFF)
600 Ω, electronically-balanced, φ6.3 mm phone jack (3P:balance)
MIC 2 – 4: -66 dB (*1), 200 Ω, electronically-balanced, XLR-3-31 type and φ6.3 mm phone jack (3P:balance) (either one usable)
MIC 5 – 6: -60 dB (*1), 600 Ω, electronically-balanced, XLR-3-31 type and φ6.3 mm phone jack (3P:balance) (either one usable)
AUX 1: -10 dB (*1), 10 kΩ mixed monaural, unbalanced, RCA pin jacks (1 pair)
AUX 2: -20 dB (*1), 10 kΩ mixed monaural, unbalanced, φ3.5 mm mini jack (3P:stereo)
Power amplifier input: 0 dB (*1), 10 kΩ, unbalanced, RCA pin jacks (1 each for ROOM and OUTSIDE outputs)
Output Speaker output: 2 zones, 100 V (42 Ω), galvanic isolated balanced, M4 screw terminal
Recording output: 0 dB (*1), 600 Ω monaural, unbalanced, RCA pin jacks (1 pair)
Effect bus output: 0 dB (*1), 600 Ω monaural, unbalanced, RCA pin jacks (1 pair)
Preamplifier output: 0 dB (*1), 600 Ω monaural, unbalanced, RCA pin jacks (1 each for ROOM and OUTSIDE outputs)
Phantom Power ON/OFF switchable for MIC 1 and XLR-3-31 type connectors of MIC 2 – 6
Signal to Noise Ratio 60 dB or more (All volume controls: min.)
Controls 6 Microphone volume controls, 2 AUX volume controls, 1 ROOM output switch, 1 ROOM volume control, 1 OUTSIDE output switch, 1 OUTSIDE volume control, 1 Effect control (0 % to 100 %) of Effect bus, 1 Effect preset type selection switch (DOME/HALL/PLATE/DELAY), 1 Effect Room size/Delay time selection switch (L/M/S/OFF), 1 Effect output selection switch (OFF/ON), 1 MIC 5-6 effect switch, 1 Low EQ control (±15 dB, 80 Hz) for MIC 1 – 6, 1 Mid EQ control (±15 dB, 2.5 kHz) for MIC 1 – 6, 1 High EQ control (±15 dB, 12 kHz) for MIC 1 – 6, 1 Speaker EQ (TC-631M, TC-651M) switch for OUTSIDE output, 1 Speaker EQ (BS-1030B, BS-1030W) switch for ROOM output, 1 Power switch, 1 Phantom switch for MIC 1, 1 Phantom switch for MIC 2 – 6 (XLR-3-31)
Indicators SLEEP indicator
Output Level meters (2 points, -20 dB and 0 dB) for ROOM and OUTSIDE
Protection indicators for ROOM and OUTSIDE amplifiers
Output indicators for ROOM and OUTSIDE
EFFECT indicator for MIC 1 – 6
Ventilation Natural air cooling
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)”
Operating Humidity 35 % to 80 %RH (no condensation)
Dimensions 420 (W) × 99.8 (H) × 360.6 (D) mm (16.54 × 3.93″ × 14.2″)
Installation Method Desktop mount, Rack mount with mounting bracket MB-25B (option)
Weight 6.1 kg (13.45 lb)
Finish Front Panel: Aluminum, black, alumite
Case: Steel plate, black, paint
Accessory Power supply cord …1, Sticker for Arabic indication …1
Option Remote controller: RC-03
Power amplifier :P-2240
Multichannel power amplifier: DA-250FH
Dynamic microphone: DM-1300
Lavalier microphone: EM-410
Horn speaker: TC-631M, TC-651M
Universal speaker: BS-1030B, BS-1030W
Rack mounting bracket: MB-25B
Perforated panel: PF-013B

 

RC-03 Remote Controller

The RC-03 Remote Controller exclusively designed for use in conjunction with the MX-6224D permits ON/OFF control of speaker zones and sound effect function.

Power Source 5 V DC (supplied from MX-6224D)
Consumption current 120 mA Maximum
Terminal RJ-45 connector
Controls 1 ROOM ON/OFF control switch
1 OUTSIDE ON/OFF control switch
1 Effect ON/OFF control switch
Indicators CONNECTION indicator
Output ON/OFF for ROOM and OUTSIDE
EFFECT ON/OFF
Connection Cable Shielded Category 5 twisted pair Straight cable for LAN (CAT5-STP)
Unshielded Category 5 twisted pair Straight cable for LAN (CAT5-UTP)
Maximum cable length 200 m (656.17 ft)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 35 % to 80 %RH (no condensation)
Dimensions 86 (W) × 87.2 (H) × 55.3 (D) mm (3.39″ × 3.43″ × 2.18″)
Weight 380 g (0.84 lb)
Finish Plated steel sheet, paint, white (RAL 9016 equivalent), paint
Accessory Sticker for Arabic indication …1

 

TZ-406W Column Speaker System

The TZ Series Column Speakers are highly efficient compact speakers that deliver excellent sound  performance in medium sized venues such as houses of worship, gymnasiums, auditoriums and more.

Enclosure Sealed Type
Rated Input 40 W
Rated Impedance 100 V line: 250 Ω (40 W), 500 Ω (20 W), 1 kΩ (10 W), 2 kΩ (5 W)
70 V line: 250 Ω (20 W), 500 Ω (10 W), 1 kΩ (5 W), 2 kΩ (2.5 W)
Sensitivity 93 dB (1 W, 1 m)
Frequency Response 150 Hz – 16,000 Hz
Speaker Component 10 cm cone-type × 4
Input Terminal Push-In terminal
Finish Enclosure: HIPS, white
Punched Net: Surface-tread steel plate, white, paint
Speaker Bracket: Aluminum die-cast, white, paint
Joint Bracket, Wall Bracket: Steel plate, t1.6, white, paint
Dimensions 135 (W) × 498 (H) × 128 (D) mm
Weight 3.5 kg (unit only)
Accessory Speaker Bracket x 1, Joint Bracket x 1, Wall Bracket x 1, Fixing Bolt (M5 x 60) x 1, Hexagon Bolt (M6 x 12) (with plain washer and spring washer) x 2, Machine Screw (M5 x 20) (with plain washer and spring washer) x 2, Hexagon Bolt (M8x 15) x 1
Option Speaker Stand: ST-16A

 

TH-652 Horn Speaker

TH-652 is a speaker horn to be use in combination with an optioanl driver unit. The powder-coated finish and stainless steel screws ensure the unit’s weatherproof capability.

Applicable Drivers TU-632, TU-632M, TU-652, TU-652M
Sound Pressure Level 110 dB (1 W, 1 m) (When operated with a driver.)
Frequency Response 200 Hz – 6,000 Hz (When operated with a driver.)
Dust/Water Protection IP65 (When operated with a driver.)
Driver Coupling 1 – 3/8 18 threads (inch screw)
Operating Temperature -20 °C to +55 °C (must be free from dew condensation)
Finish Horn flare and flange: Aluminum, White, powder coating
Reflector horn: HIPS, White
Bracket: Steel, White, powder coating
Screws and bolts: Stainless steel
Dimensions Φ500 × 357 (D) mm
Weight 2.7 kg

 

 

Main Menu